0

Out of 0 Ratings

Owner's of the Bayou Classic Cooktop SP10 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 36
 
BEFORE LIGHTING
O
F
F
-
C
L
O
C
K
W
I
S
E
O
N
-
C
O
U
N
T
E
R
-
C
L
O
C
K
W
I
S
E
O
N
-
C
O
U
N
T
E
R
-
C
L
O
C
K
W
I
S
E
O
N
-
C
O
U
N
T
E
R
-
C
L
O
C
K
W
I
S
E
S-L-O-W-L-Y
T
urn Regulator Valve ON
counter-clockwise
O
F
F
-
C
L
O
C
K
W
I
S
E
LIGHT
COOKER
HERE!
Place lit Match above Jet Tube
5
Make sure LP Cylinder is OFF
1
Make sure Regulator Valve is OFF
LIGHTING
ADJUST Regulator Valve
for Flame Height
6
NOTE: The brass valve on
regulator hose assembly
controls flame intensity
only
. It is not an
ON/OFF valve.
Position hand
below cooker
After lighting Burner, OPEN
LP Cylinder V
alve FULLY
S-L-O-W-L-Y Turn
LP Cylinder V
alve One Full Turn
counter-clockwise
4
Gas will flow
to and stop
at closed
regulator
O
N
-
C
O
U
N
T
E
R
-
C
L
O
C
K
W
I
S
E
2 & 3
Make sure Jet Tube is clean,
orifice hole facing straight up
and flame spreader is open
7
Flame Spreader
in OPEN Position
Jet Tube
Orifice
Hole
DO NOT light Cooker
BELOW Jet T
ube
18
Model #SP1 JET COOKER - LIGHTING INSTRUCTIONS
Follow these instructions exactly. Read and follow all warnings and instructions in this manual before
using your cooker
.
1. Make sure regulator valve and cylinder valve are in the OFF position.
2. Look into the jet tube to be certain that orifice hole in brass cap is facing straight up. If needed,
use a wrench to turn the brass cap so that the orifice hole is facing straight up.
3. Make certain that Flame Spreader is in open position.
4. Turn ON the fuel supply by S-L-O-W-L-Y rotating the cylinder valve counter-clockwise one full turn.
HINT: Turning the cylinder valve quickly causes a sudden rush of gas that sometimes activates the
Gas Flow Limiting Device. To prevent this, always rotate cylinder valve S-L-O-W-L-Y.
5. Place fire place match or long lighter over the jet tube, then S-L-O-W-L-Y turn regulator valve
clockwise until you hear gas HISSING to the burner. Then light the cooker, keeping hands and face
away from the top of the jet tube. In direct sunlight, flame may appear clear.
6. Adjust the regulator valve for desired flame height.
7. After lighting, rotate cylinder valve to full open.
WARNING
DO NOT stand with head, body or arms over the cooker when lighting. Loose clothing and hair can
catch fire during lighting and operation.
FOR YOUR SAFETY: