RESETTING THE TEMPERATURE CUTOFF SWITCH
Should the heater overheat, an automatic switch will turn the heater off and it will not come
back on without being reset. The temperature cutoff switch can be reset by unplugging the
unit, waiting 5 minutes and plugging the unit back in.
If you need to continuously reset the heater, unplug the unit and call Dimplex North America
Limited at 1-800-668-6663 and press 4 for technical support.
The remote control has a range of approximately 50 ft. (15.25m), it does not have to be
pointed at the fireplace and can pass through most obstacles (including walls). It is supplied
with 243 independent frequencies to prevent interference with other units.
1. Depress tab on the battery cover on the back of the remote transmitter and remove
2. Install 3 AAA batteries into the remote control. (included)
3. Replace the battery cover.
The remote transmitter has a battery backup time of 24 hours. The batteries can be removed
for up to 24 hours before the transmitter will require re-initialization.