Out of 1 Ratings

Owner's of the Dimplex Indoor Fireplace DFG3033 gave it a score of 3.4 out of 5. Here's how the scores stacked up:
  • Reliability

    3.0 out of 5
  • Durability

    3.0 out of 5
  • Maintenance

    2.0 out of 5
  • Performance

    4.0 out of 5
  • Ease of Use

    5.0 out of 5
of 22
12 www.dimplex.com
independent frequencies to
prevent interference with other
Battery Installation
Depress tab on the battery 1.
cover on the back of the
remote control and remove
battery cover (Figure 6).
Install two (2) AAA batteries 2.
into the remote control
Ensure child lock is in the 3.
“unlocked” position (Figure 6).
Replace the battery cover.4.
NOTE: When the “BAT”
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
the Remote Control
Plug cord into 120 Volt wall 1.
Ensure the Main On/Off 2.
Switch located in the switch
box on the replace in the
upper right hand corner is in
ON position (Figure
Set the 3 Position Manual 3.
Control (Figure 5B) to
the Remote position (left
Press and hold the 4.
Initialization Button on the unit
(Figure 5C).
While holding the Initialization 5.
Button, press the Flame/
Heat On/Off
button on the
remote control.
Release the Initialization 6.
Button on the unit.
Press the Flame/Heat On/Off 7.
to turn the Flame/
Heat function on.
Figure 6
Child Lock
symbol is present on
the remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote/
replace. The remote control
has a battery backup time of
only several hours.