Dimplex Indoor Fireplace DF3215 User Manual

0

Out of 0 Ratings

Owner's of the Dimplex Indoor Fireplace DF3215 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
PERSONAL PROGRAM SCHEDULE
Before programming the heater use the personal program schedule below to determine which
time and temperature settings meet your schedule.
Use a pencil to be able to revise your records each time you are required to change your
program settings.
Day Program 1 (P1) Program 2 (P2)
Mon.
Time
Temp
Time Temp
Tues.
Time Temp
Time Temp
Wed.
Time Temp
Time Temp
Thurs.
Time Temp
Time Temp
Fri.
Time Temp
Time Temp
Sat.
Time Temp
Time Temp
Sun.
Time Temp
Time Temp
TEMPORARY MANUAL OVERRIDE
To temporarily change the current set temperature without affecting the current programs:
1. Press the Flame/Heat On/Off button, the display will disappear.
2. Press the right or left direction button to select the set temperature.
3. To cancel the temporary manual override press the Flame/Heat On/Off button and
the programmed settings will be reactivated.
PROGRAMMING INDIVIDUAL DAY SETTING
The Individual Day setting allows the user to program the heater thermostat to operate at a
selectable time and temperature for each day of the week individually. ( )
1. Press the ENTER button, the middle display flashes.
2. Use the direction buttons on the hand held remote to move the cursor to
3. Press and hold ENTER for 4 – 5 seconds, display will flash.
4. Press the right or left direction button to select the day of the week.
( )
5. Press the up direction button and the hour display to flash.
6. Press the right or left direction button to select the hour.
7. Press the up direction button and the minute display will flash.
8. Press the right or left direction button to select the minute.
9. Press the up direction button and the set temperature display will flash.
10. Press the right or left direction button to select the temperature setting.
11. Press the up direction button and the P1 indicator will change to P2 and the hour
display will flash.
12. Repeat steps 5 – 10 for the P2 setting.
13. Press the up direction button and the individual day programmed will flash.
14. Press the right direction button for each additional required program day.
15. Repeat steps 5 – 14 for the remaining individual days.
16. Press ENTER.
17. Press the up direction button to turn the programmable heater function ON and press
the down direction button to turn the programmable heater function OFF.
18. Press ENTER to return to the main menu.
NOTE
When programmable heater function is ON the red indicator light is illuminated on the
firebox and the display will appear on the remote control.
NOTE
Press the ENTER button at any time to exit and return to the main menu.
12

   Find Your Products By Category