0
Owner's of the Dimplex Fan DF2608 gave it a score of 0 out of 5. Here's how the scores stacked up:
11
NOTE
Ensure the logset is installed tightly under the back ledge to
prevent light leakage.
Upper Light Bulb Requirements
Quantity of 2 clear chandelier or candelabra bulbs with an E-
12 (small) socket base, 15 watt rating.
DO NOT EXCEED 25 WATTS PER BULB
To access the upper light bulb area:
1. Slide fireplace out of mantel
2. Lay unit on it’s back for safe removal of front glass.
3. Remove 4 Phillips screws from right side of trim.
4. Remove trim.
5. Slide glass to the right side of the fireplace to
remove.
6. Upper bulbs located in the upper left and upper right
corners of fireplace.
7. Unscrew bulbs counter clockwise.
8. Insert new bulbs.
9. Re-install upper light bracket.
10. Lay unit on it’s back slide front glass back into
position and attach trim.
Glass Cleaning
The glass is cleaned in the factory during the assembly
operation. During shipment, installation, handling, etc., the
glass may collect dust particles; these can be removed by
dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be
cleaned with a damp cloth. To prevent scratching, do not use
abrasive cleaners or spray liquids on the any surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm water only to clean painted
surfaces of the electric fireplace. Do not use abrasive
cleaners.
Find Your Products By Category
Please Login
