Bayou Classic Cooktop SP10 User Manual

0

Out of 0 Ratings

Owner's of the Bayou Classic Cooktop SP10 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 36
 
WARNING
OPERATING INSTRUCTIONS
Read, understand and follow all warnings and instructions contained in this manual. DO NOT skip
any of the war
nings and instructions contained in the preceding sections of this manual.
• Do not use a cooking vessel larger than 100-quart for boiling or 36-quart for frying.
DO NOT use a cooking vessel smaller than 12" diameter on this cooker.
• Determine what size cooking vessel to use and Proper Amount of Liquid for Cooking.
Follow instructions on pages 21 - 22.
• Make sure cooker is positioned at least 10-ft from all combustible materials including building
overhangs and tree branches. Follow positioning instructions on page 15.
• Check for gas leaks. Follow Gas Leak Testing Instructions on page 13 - 14.
• Follow Lighting and Re-lighting Instructions for Model #SP10 Cooker on pages 16 - 17.
• Follow Lighting and Re-lighting Instructions for Model #SP1 Jet Cooker on pages 18 - 19.
• When frying, test cooking thermometer to ensure accurate temperature reading.
Follow Thermometer Test and Placement Instructions on pages 20 - 21.
• Never leave oil unattended during preheating or cooking process as it can ignite and cause a fire.
Hot cooking oil is extremely hazardous and must be monitored at all times.
• Remain attended to the cooker and when frying check the thermometer every 3 minutes.
• Never allow oil to reach FIRE HAZARD zone on the thermometer.
• Smoking oil is an indication that the oil is too hot and may ignite and cause a fire. Cooking
oil/grease ignites at varying temperatures, so check thermometer every 3 minutes during oil
heat-up and frying. Never allow the oil to exceed 400˚F and NEVER LEAVE HEATING OIL UNATTENDED.
• Use extreme care when lowering food and utensils into and removing from hot oil or liquid.
•
When cooking is completed, turn off gas to the cooker. Follow Disconnecting Instructions in this manual.
• Follow General Maintenance and Storage Instructions of page 32.
There is a simple way to test a thermometer.
1. Inser
t thermometer stem into boiling water.
2. While wearing protective gloves, hold your thermometer by the dial and insert stem into boiling water.
The needle should quickly move around the dial and register approximately 212˚F (100˚C).
This indicates your thermometer is working. NOTE: Due to water evaporation, the maximum reading
on a thermometer in hot water test is 212˚F (100˚C). Hot cooking oil will send the temperature reading
above 212˚F (100˚C).
3. If the needle stops at a low temperature i.e. 180˚F; this indicates your thermometer is not working
properly. If so, discard the thermometer and call 1-800-864-6194 M-F 8am - 5pm CST for assistance.
Replacement thermometer Model #5020 or #5025.
DO NOT attempt frying if your thermometer is not working!
WARNING
Always use a thermometer when frying any food products. A thermometer is a sensitive measuring
device which may not work properly if dropped, bent, or twisted. Always check to be sure your
thermometer is working properly before frying. DO NOT use a meat thermometer for frying.
THERMOMETER TEST INSTRUCTIONS
20

   Find Your Products By Category